Naftocit ZMP

ZMP

Non-staining Antioxidant
Chemical description:
Steric hindered polyphenol
CAS Reg. No.: 68610-51-5

Behaviour in vulcanization

NAFTONOX ZMP is a highly efficient non-staining antioxidant which cannot be washed out and which is based on a polymeric, steric hindered bisphenol. It is an antioxídant for natural rubber and all synthetic rubbers, less suitable for EPDM, IIR and heat resistant special rubbers.

NAFTONOX ZMP is used for white, light coloured and transparent vulcanizates on natural rubber and all synthetic rubbers and their latices. 1t protects the vulcanizates against ageing under the action of oxygen and/or heat. The low volatility of NAFTONOX ZMP is especially important since due to it the loss of antioxidant is extremely low during work, the following vulcanization and with the finished product. The resistance against washing and boiling, when used in latex thread and many latex foam backings, is excellent.

NAFTONOX ZMP undergoes no discoloration on exposure to sunlight. I does not bloom nor does it affect the mechanical properties of vulcanizates.

Typical fields of application

White, transparent and coloured rubber goods, e.g. tubes, profiles, toys, bathing articles, etc. Latex products, e.g. carpet backing, rubber thread, latex foam, dipping articies, etc. Hot melt formulations on the basis of EAM or EVA, thermopiastie rubber and polyaminoamides.

Dosage

According to the required protection the dosage should range from 0.5-1.0 phr. Although NAFTONOX ZMP is slightiy less effertive than NAFTONOX 2246 it behaves favourably with regard to staining, notably in oxidizing environments.

Food contact applications

BGA: Empf. XXI, Cat. 1 FDA: Regulated in CFR 21, § 177.2600

Shelf life

2 years minimum when avoiding extremely high temperatures and humidity.

Standard packing

Multi-ply paper bags with PE-Iining, 15 or 20 kg.

Product information

NAFTONOX ZMP Product form: powder
Product Specification
Melting point start (°C) min. 105
Sieve residue 63 micro (%) max. 4
Evaporation loss (100°C/2 h) (%) max. 1.0
Ash content (%) max. 0.5
Colour cream coloured powder
Appearance free of hard parts and conglomerations
Typical Propertics
Specific gravity 20°C g/cm3 approx. 1.3